SOLO

General:

The SOLO is used for doors, drawers and sliding doors and is attached to the respective door or panel on the inside. Invisible from the outside, the SOLO lock is then operated with key cards, key fobs, wristbands or with the smartphone.
The RFID reading range and battery life depends on the technology used and the quality of the keys used (key cards, key fobs, RFID stickers, or wristbands) or battery.

SOLO locks are available in the following versions:

SOLO 125 / 125+ (125 KHz)

• Access control for up to 49 RFID keys
• EM4102/ EM4200 RFID technology
• Software: BOLT (locks not automatically, but with the card)
• Software: GYM (Free choice of cabinet for gyms)
• Software: ALARM (alarm when door is open)

SOLO 13 / 13+ (Mifare, 13.56 MHz)

• Zugangskontrolle für bis zu 49 RFID-Schlüssel
• Mifare ISO 14443A RFID technology
• Software: BOLT (locks not automatically, but with the card)
• Software: GYM (Free choice of cabinet for gyms)
• Software: ALARM (alarm when door is open)

SOLO 13 – EXT

• The external antenna has an improved range for Key fob and is recessed with a 35 mm hole

SOLO BT

• Can also be used in metal cabinets due to Bluetooth technology
• Controllable via our app or via own app

SOLO SECONDARY

• The SOLO SECONDARY is plugged directly into the back of the SOLO 125, SOLO 13 or SOLO BT and thus opens simultaneously. The cable length is 1.5 m as standard and can also be changed on request. Alternatively, the SOLO SECONDARY can also be controlled by other microprocessors.

SOLO 3 V / 12 V DC

• SOLO 3 V
  The SOLO 3 V is operated with a voltage of 2-3 V DC and has a cable length of 1.5 m. Mostly a changeover switch or a relay is used
• SOLO 12 V
  The SOLO 12 V is operated with a voltage of 8-16 V DC and has a cable length of 1.5 m. A changeover switch or a relay is usually relay is used.