Programming the locks is as simple as can be using the supplied NFC transponders, which can be assigned master functions using an NFC-enabled smartphone and a free app. The RJ1905 RFID lock is a read/write system where information is also transferred from the lock to the transponder.

In public mode, for example, this ensures that only one transponder can be used to lock one lock at a time (busy detection). Furthermore, information such as cabinet or compartment numbers can be written to the transponder during closing, which can then be read out from the transponders using a smartphone if required.

In private mode, up to 8 transponders per lock can be taught-in and removed again.

Because the RJ1905 RFID lock is always in sleep mode and has to be woken up by pressing a button each time it interacts with a transponder, energy consumption is similarly low to that of the RJ1904 PIN CODE lock. Depending on the operating mode, more than 80,000 closing cycles with a single standard 1.5V AA alkaline battery.

RFID lock RJ1905 with its transponders represents a closed system that works only with the transponders (13.56 MHz Mifare Ultralight) certified and initialized by us. This makes RJ1905 the first choice wherever locks and transponders are needed that harmonize perfectly and without interference. Transponders can be cards, tags or wristbands.

Further RFID lock versions that also support non-system transponders will follow.

Made in Germany

 

Features:

– Closed RFID locking system 13.56 MHz (Mifare Ultralight)

– Private and public applications

– Read / Write system (busy detection / cabinet number)

– NFC transponders available in card, tag or wristband form and quickly and flexibly programmable to master or user transponders

– AUTO UP TIMER to avoid permanent reservation available in public mode

– LED and sound signals

– Factory reset possible

– Retrofittable (standard mounting 16×19)

– Battery operated and mains-independent (stand alone)

– Mechanical service cylinder for emergency opening

– Low maintenance and environmentally friendly LOW ENERGY SYSTEM(approx. 80,000 closing cycles with a single standard commercial battery)*.

– Battery: 1x 1.5V AA (standard alkaline manganese cell)

– The battery can be changed quickly and easily from the front with the door closed using the service key, without the need for any additional tools and while retaining all settings.

– Additional fastening options for wooden, HPL and glass doors

– Control panel removable by means of service key, e.g. for battery replacement, programming or cabinet transport

– Control panel removable by means of service key, e.g. for battery replacement, programming or cabinet transport

– Extensive selection of bars

– Ready for installation as delivered incl. Bolt, fastening material and battery